-40%
Hantek HT30A BNC to Dual Banana Head Test Line Leads Adapter + 5Pcs Back Probe
Hantek HT30A BNC to Dual Banana Head Test Line Leads Adapter + 5Pcs Back Probe
Hantek HT30A BNC to Dual Banana Head Test Line Leads Adapter + 5Pcs Back Probe
Hantek HT30A BNC to Dual Banana Head Test Line Leads Adapter + 5Pcs Back Probe
Hantek HT30A BNC to Dual Banana Head Test Line Leads Adapter + 5Pcs Back Probe
Hantek HT30A BNC to Dual Banana Head Test Line Leads Adapter + 5Pcs Back Probe
Hantek HT30A BNC to Dual Banana Head Test Line Leads Adapter + 5Pcs Back Probe
Hantek HT30A BNC to Dual Banana Head Test Line Leads Adapter + 5Pcs Back Probe
Hantek HT30A BNC to Dual Banana Head Test Line Leads Adapter + 5Pcs Back Probe
Hantek HT30A BNC to Dual Banana Head Test Line Leads Adapter + 5Pcs Back Probe
Hantek HT30A BNC to Dual Banana Head Test Line Leads Adapter + 5Pcs Back Probe
Hantek HT30A BNC to Dual Banana Head Test Line Leads Adapter + 5Pcs Back Probe

Hantek HT30A BNC to Dual Banana Head Test Line Leads Adapter + 5Pcs Back Probe

$ 8.97

Availability: 135 in stock
  • Return shipping will be paid by: Buyer
  • Model: ht30a
  • Condition: New
  • Item must be returned within: 60 Days
  • Brand: hantek
  • Restocking Fee: No
  • All returns accepted: Returns Accepted
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Multimeter Connection: BNC
  • MPN: Does not apply
  • Test End(s): BNC
  • Country/Region of Manufacture: China

    Description

    Test lead of a male BNC connector to (2) 4mm connectors. It's a special line for assisting automobile measurement instruments to test various types of signals. 4mm connectors are coded in two colors, black and red. Lead length is about 3 meter.
    Features:
    The auto test cable (HT30A) is a kind of special line for assisting automobile measurement instruments to test various types of signals.
    High quality and professional high voltage auto test lead.
    It's about 3 meter in length allows the oscilloscope to be placed on the work bench away from the car being tested or repaired.
    It consists of wide range probes, clips, gators can be plugged into the 4 mm connectors at the end of the cable.
    It adopts full shield which can help reduce the noise interference.
    Note:
    To avoide the lines twisting together, the two pieces of lines with connectors are not the same in length.
    The short line is earth wire, and the long line is positive pole which should be connected with the auto engine cable, which also can cooperate with a 20:1 attenuator.
    Specifications:
    Probe Quantity: 1 pc
    Peak Attenuation Ratio: 10000：1
    Input Resistance: 50Ω
    Length: Approx. 2.9m / 9.5ft
    Item Weight: 148.5g / 5.2oz
    Package Size: 24.5 * 17.5 * 3cm / 9.6 * 6.9 * 1.2in
    Package Weight: 154g / 5.4oz
    This acupuncture probe is a back pinning, piercing and repairable probe. This set includes 5pcs complete acupuncture probes, 2pcs screws, and 20pcs replacement needles.
    Features:
    The fine tip can slide past weather pack seals to probe connectors.
    As acupuncture probes, they are used for piercing the insulation of wires to allow for automotive electrical measurements without causing damage to the wires.
    They can be used as pin-tip probes while working with small circuit boards.
    The set of 5 probes also comes with 20 replacement pins, there's no need to replace the whole probe.
    Its small diameter, extra sharp pin makes it ideal for piercing the insulation on small gauge wires.
    Specifications:
    Probes Color: Black/Blue/Yellow/Red/Greem
    Acupuncture Probes: 5pcs
    Replacement Needles: 20pcs
    Complete Probe Length(1pc): 65mm / 2.56in
    Length of Pin: 37mm / 1.45in
    Package Size: 12 * 7.5cm / 4.72 * 2.95in (L * W)
    Package Weight: 23g / 0.81oz
    Package List:
    1 * Auto Test Lead
    5* Complete Acupuncture Probes
    20 * Replacement Needles