Aalberg Audio KOR KO-1 Chorus/Flanger Guitar Effects Pedal w/ Wireless Control

Description

New Aalberg Audio KOR KO-1 Chorus/Flanger Guitar Effects Pedal with Wireless Control
The
KOR KO-1 Chorus/Flanger Pedal
from
Aalberg Audio
is a high-quality stereo in/out combined chorus and flanger stompbox that can be controlled wirelessly with the optional AERO AE-1 controller
(NOT INCLUDED)
. The pedal offers different mono and stereo configurations including a dry/wet split and stereo panning from left to right, giving a more spacious feel to the flanger or chorus effect.
The KOR Chorus/Flanger can also be controlled by a free iOS/Android remote app that provides easy editing and allows the saving of presets for later recall. All the electronics are contained in a rugged, custom-made aluminum housing, while the onboard purple LED bars at the top provide actual parameter settings, easily seen from a distance or in low light. The KOR is powered by an optional 9V adapter
(NOT INCLUDED)
.
General Features
Parameters: Speed, Intensity, and Depth
Toggle between chorus and flanger
True bypass
Compatible with AERO AE-1 Wireless Controller
Upgrade firmware and sound algorithms by using the Aalberg Update app (iOS only)
Control pedal and get extended functionality using the Aalberg Remote App (Coming soon)
Controls
Speed: Adjust the speed of the chorus/flanger effect
Intensity: Adjust the dry/wet mix between the input signal and the effect signal. In Flanger mode, this parameter also adjusts the feedback amount
Depth: Adjust the degree of pitch shifting in the chorus/flanger effect; Depth set to minimum means no effect
FX-Select/ Flanger
FX-Select: Choose active effect parameter (Speed, Intensity, or Depth) for wireless control (optional)
Flanger: Press and hold the FX-Select footswitch to toggle between the two modes
FLANGER (no light): Chorus mode active
FLANGER (light): Flanger mode active
On/Off: Set the pedal to ON (activated) or OFF (true bypass)
Input/Output Setups
Mono In/Mono Out: Connect your instrument to Mono In and the amplifier to Mono Out
Mono to Stereo Spread: Connect your instrument to Mono In, then connect one amplifier to Mono Out, and another amplifier to Stereo Out. The stereo spread effect is a combination of phase inversion and a continuous panning of the signal from side to side, resulting in a wide stereo effect
Dry/Wet Split: Connecting your instrument to Stereo In will split the dry wet signal as follows
Mono Out: 100% wet signal
Stereo Out: 100% dry signal
Stereo to Stereo Spread: By plugging into both the mono and stereo inputs, and both mono and stereo outputs, you will obtain the same stereo spread effect achieved with the Mono to Stereo Spread connections. This is useful if you want to maintain the stereo image from the output of another pedal in your signal chain